ACL Commands
78-20269-01 Command Line Interface Reference Guide
549
40
Example
console(config)#
mac access-list extended
server-acl
console(config-mac-al)#
permit
00:00:00:00:00:01 00:00:00:00:00:ff
any
console(config-mac-al)#
exit
console(config)#
interface
gi1
console(config-if)#
service-acl input
server-acl
40.11 absolute
Use the absolute Time-range Configuration mode command to specify an
absolute time when a time range is in effect. Use the no form of this command to
remove the time limitation.
Syntax
absolute
start hh:mm day month year
no absolute
start
absolute
end hh:mm day month year
no absolute
end
Parameters
•
start—Absolute time and date that the permit or deny statement of the
associated function going into effect. If no start time and date are specified,
the function is in effect immediately.
•
end—Absolute time and date that the permit or deny statement of the
associated function is no longer in effect. If no end time and date are
specified, the function is in effect indefinitely.
•
hh:mm—Time in hours (military format) and minutes (Range: 0–23, mm: 0–5)
•
day—Day (by date) in the month. (Range: 1–31)
•
month—Month (first three letters by name). (Range: Jan...Dec)
•
year—Year (no abbreviation) (Range: 2000–2097)
Default Configuration
There is no absolute time when the time range is in effect.
