manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Administration Manual

Share
Download
Cisco Small Business 300 1.1 Series Administration Manual Download Page 423

Virtual Local Area Network (VLAN) Commands

78-20269-01 Command Line Interface Reference Guide

424

30

 

30.21 switchport general map macs-group vlan

After groups of MAC addresses have been created (see 

map mac macs-group

), 

they can be mapped to specific VLANs.

Use the switchport general map macs-group vlan Interface Configuration 
(Ethernet, Port-channel) mode command to set a MAC-based classification rule. 
Use the no form of this command to delete a classification rule.

Syntax

switchport general map macs-group 

group

 vlan 

vlan-id

no switchport general map macs-group 

group

Parameters

•

 macs-group 

group

—Specifies the group number (range: 1–2147483647)

•

 vlan 

vlan-id

—Defines the VLAN ID associated with the rule.

Default Configuration

N/A

Command Mode

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

MAC-based VLAN rules cannot contain overlapping ranges on the same interface.

The VLAN classification rule priorities are:

1.

MAC-based VLAN (Best match among the rules).

2.

Subnet-based VLAN (Best match among the rules).

3.

Protocol-based VLAN.

4.

PVID.

Example

The following example creates two groups of MAC addresses, sets a port to 
general mode and maps the groups of MAC addresses to specific VLANs.

Console(config)# 

vlan database

console(config-vlan)# 

map mac

 0000.1111.0000 32 

macs-group

 1

Summary of Contents for Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands