manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Administration Manual

Share
Download
Cisco Small Business 300 1.1 Series Administration Manual Download Page 420

Virtual Local Area Network (VLAN) Commands

78-20269-01 Command Line Interface Reference Guide

421

30

 

Console(config-if)# 

switchport mode general

Console(config-if)# 

switchport general ingress-filtering disable

30.18 switchport general acceptable-frame-type

The switchport general acceptable-frame-type Interface Configuration mode 
command configures the types of packets (tagged/untagged) that are filtered 
(discarded) on the interface. Use the no form of this command to return ingress 
filtering to the default. 

Syntax

switchport general acceptable-frame-type 

{tagged-only | untagged-only | all}

no switchport general acceptable-frame-type

Parameters

•

tagged-only—Ignore (discard) untagged packets and priority-tagged 
packets.

•

untagged-only—Ignore (discard) VLAN-tagged packets (not including 
priority-tagged packets)

•

all—Do not discard packets untagged or priority-tagged packets.

Default Configuration

All frame types are accepted at ingress (all).

Command Mode

Interface Configuration (Ethernet, port-channel) mode

Example

The following example configures port 

gi3

 to be in general mode and to discard 

untagged frames at ingress.

Console(config)# 

interface 

gi3

Console(config-if)# 

switchport mode general

Console(config-if)# 

switchport general acceptable-frame-type tagged-only

Summary of Contents for Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands