manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Administration Manual

Share
Download
Cisco Small Business 300 1.1 Series Administration Manual Download Page 414

Virtual Local Area Network (VLAN) Commands

78-20269-01 Command Line Interface Reference Guide

415

30

 

Command Mode

Interface Configuration (Ethernet, port-channel) mode

Example

To add VLANs 2,3 and 100 to trunk ports 1 to 13:

console(config)# 

interface range

 gi1-13

console(config-if)# 

switchport

 

mode

 

trunk

console(config-if)# 

switchport

 

trunk

 

allowed

 

vlan

 

add

 2-3,100

console(config-if)#

30.14 switchport trunk native vlan 

If an untagged packet arrives on a trunk port, it is directed to the port’s native 
VLAN. Use the switchport trunk native vlan Interface Configuration (Ethernet, 
port-channel) mode command to define the native VLAN for a trunk interface. Use 
the no form of this command to restore the default native VLAN.

Syntax

switchport trunk native vlan 

vlan-id

no switchport trunk native vlan

Parameters

•

vlan-id—Specifies the native VLAN ID.

Default Configuration

The default VLAN is the native VLAN.

Command Mode

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

The command adds the port as a member of the VLAN. If the port is already a 
member of the VLAN (not a native), it must first be removed from the VLAN.

Summary of Contents for Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands