manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Administration Manual

Share
Download
Cisco Small Business 300 1.1 Series Administration Manual Download Page 367

Spanning-Tree Commands

78-20269-01 Command Line Interface Reference Guide

368

29

 

29.7

spanning-tree disable

Use the spanning-tree disable Interface Configuration (Ethernet, port-channel) 
mode command to disable the spanning tree on a specific port. Use the no form of 
this command to enable the spanning tree on a port.

Syntax

spanning-tree disable

no spanning-tree disable

Default Configuration

Spanning tree is enabled on all ports.

Command Mode 

Interface Configuration (Ethernet, port-channel) mode

Example

The following example disables the spanning tree on 

gi5

Console(config)# 

interface 

gi5

Console(config-if)# 

spanning-tree disable

29.8

spanning-tree cost

Use the spanning-tree cost Interface Configuration (Ethernet, port-channel) mode 
command to configure the spanning-tree path cost for a port. Use the no form of 
this command to restore the default configuration.

Syntax

spanning-tree cost 

cost

no spanning-tree cost

Parameters

cost—Specifies the port path cost. (Range: 1–200000000)

Summary of Contents for Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands