manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Administration Manual

Share
Download
Cisco Small Business 300 1.1 Series Administration Manual Download Page 334

Address Table Commands

78-20269-01 Command Line Interface Reference Guide

335

27

 

27.10 bridge multicast ipv6 ip-address

Use the bridge multicast ipv6 ip-address Interface Configuration (VLAN) mode 
command to register an IPv6 multicast address to the bridge table, and statically 
add or remove ports to or from the group. Use the no form of this command to 
unregister the IPv6 address.

Syntax

bridge multicast ipv6 ip-address 

ipv6-multicast-address [[add | remove] {ethernet 

interface-list | 
port-channel port-channel-list}]

no bridge multicast ipv6 ip-address 

ip-multicast-address

Parameters

•

ipv6-multicast-address—Specifies the group IPv6 multicast address.

•

add—Adds ports to the group.

•

remove—Removes ports from the group.

•

ethernet 

interface-list

—Specifies a list of Ethernet ports. Separate 

nonconsecutive Ethernet ports with a comma and no spaces; use a hyphen 
to designate a range of ports.

•

port-channel 

port-channel-list

—Specifies a list of port channels. Separate 

nonconsecutive port-channels with a comma and no spaces. Use a hyphen 
to designate a range of port channels.

Default Configuration

No multicast addresses are defined.

The default option is add.

Command Mode

Interface Configuration (VLAN) mode

User Guidelines

To register the group in the bridge database without adding or removing ports or 
port channels, specify the ipv6-multicast-address parameter only.

Static Multicast addresses can be defined on static VLANs only.

Summary of Contents for Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands