manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Administration Manual

Share
Download
Cisco Small Business 300 1.1 Series Administration Manual Download Page 328

Address Table Commands

78-20269-01 Command Line Interface Reference Guide

329

27

 

Command Mode

Interface Configuration (VLAN) mode

User Guidelines

To register the group in the bridge database without adding or removing ports or 
port channels, specify the ip-multicast-address parameter only.

Static multicast addresses can be defined on static VLANs only.

You can execute the command before the VLAN is created.

Example

The following example registers the IP address to the bridge table:

Console(config)# 

interface vlan

 8

Console(config-if)# 

bridge multicast ip-address

 239.2.2.2

The following example registers the IP address and adds ports statically.

Console(config)# 

interface vlan

 8

Console(config-if)# 

bridge multicast ip-address

 239.2.2.2 

add 

gi9

27.6

bridge multicast forbidden ip-address

Use the bridge multicast forbidden ip-address Interface Configuration (VLAN) 
mode command to forbid adding or removing a specific IP multicast address to or 
from specific ports. Use the no form of this command to restore the default 
configuration.

Syntax

bridge multicast forbidden ip-address 

{ip-multicast-address} {add | remove} 

{ethernet interface-list | port-channel port-channel-list}

no bridge multicast forbidden ip-address {

ip-multicast-address

}

Parameters

•

ip-multicast-address—Specifies the group IP multicast address.

Summary of Contents for Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands