manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Administration Manual

Share
Download
Cisco Small Business 300 1.1 Series Administration Manual Download Page 327

Address Table Commands

78-20269-01 Command Line Interface Reference Guide

328

27

 

Example

The following example forbids MAC address 0100.5e02.0203 on port 

gi9

 within 

VLAN 8.

Console(config)# 

interface vlan

 8

Console(config-if)# 

bridge multicast address

 0100.5e02.0203

Console(config-if)# 

bridge multicast forbidden address

 0100.5e02.0203 

add 

gi9

27.5

bridge multicast ip-address

Use the bridge multicast ip-address Interface Configuration (VLAN) mode 
command to register IP-layer multicast addresses to the bridge table, and 
statically add or remove ports to or from the group. Use the no form of this 
command to unregister the IP address.

Syntax

bridge multicast ip-address 

ip-multicast-address [[add | remove] {ethernet 

interface-list

 | 

port-channel port-channel-list

}]

no bridge multicast ip-address 

ip-multicast-address

Parameters

•

ip-multicast-address—Specifies the group IP multicast address.

•

add—Adds ports to the group.

•

remove—Removes ports from the group.

•

ethernet 

interface-list

—Specifies a list of Ethernet ports. Separate 

nonconsecutive Ethernet ports with a comma and no spaces. Use a hyphen 
to designate a range of ports.

•

port-channel 

port-channel-list

—Specifies a list of port channels. Separate 

nonconsecutive port-channels with a comma and no spaces. Use a hyphen 
to designate a range of port channels.

Default Configuration

No Multicast addresses are defined.

Default option is add.

Summary of Contents for Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands