C-2
Cisco SIP IP Phone Administrator Guide
Appendix C Technical Specifications
Cable Specifications
Cable Specifications
The following cables are required to connect the Cisco SIP IP phone:
•
RJ-11 for the handset connection
•
RJ-45 jack for the LAN connection (labeled “10/100 SW”).
•
RJ-45 jack for a second 10Base-T compliant connection (labeled “10/100 PC”).
•
48-volt power connector. The diameter of the center pin in the phone power jack (Switchcraft 712A)
is .1 inches (2.5 mm). The center pin is positive (+) voltage. The miniature power plug required to
mate with the power jack on the phone is a Switchcraft 760 or equivalent.
Regulatory Safety Compliance
The Cisco IP Phone models 7960, 7940, and 7910 meet the following regulatory safety and compliance
approvals:
•
CE Marking
•
Safety
–
UL1950
–
CSA C22.2 No. 950
–
EN 60950
–
IEC 60950
–
AS/NZS 3260
–
TS001
•
EMC
–
AS/NZS 3548 Class B
–
VCCI Class B
–
FCC (47CFR) Part 15 Class B
–
EN 55022, Class B
•
Telecom
–
IC CS-03
–
FCC (47CFR) Part 68
Figure C-1
contains the FCC Class B Declaration for the Cisco IP Phone 7960, 7940, 7910, and
7910+SW.
