SNMP
Configuring SNMP Views
Cisco 220 Series Smart Switches Administration Guide Release 1.1.0.x
278
19
Configuring SNMP Views
A view is a user-defined label for a collection of MIB tree subtrees. Each subtree ID
is defined by the OID of the root of the relevant subtrees. You can either use well
known names to specify the root of the desired subtree or enter an OID.
Each subtree is either included or excluded in the view being defined.
Use the Views page to configure the SNMP views. The default views cannot be
changed. Views can be attached to groups on the SNMP > Groups page or to a
community which employs basic access mode on the SNMP > Communities page.
To define SNMP views:
STEP 1
Click
SNMP
>
Views
.
STEP 2
To add a new SNMP view, click
Add
.
STEP 3
Enter the following information:
•
View Name
—Enter a unique view name.
•
Object ID Subtree
—Select
User Defined
to manually define an OID, or
select an existing OID from the list. All descendants of this node will be
included or excluded in the view.
•
Include In View
—Check to include the selected MIBs in this view, or
uncheck to exclude them.
STEP 4
Click
Apply
. The SNMP view is defined, and the Running Configuration is updated.
