background image

15

Configuration with the Web browser

SE680 WiMAX / engbt / SE680_FUG_EN-7 / Basic_configuration.fm / 13.5.11

Schablo

ne 201

1_04

_07

Configuration with the Web browser

You do not need to install any software on your PC to configure your SE680 WiMAX 
modem; the configuration program is stored on the device. Open this software in the 
same way as an Internet page in the Web browser and make the required settings. Your 
settings are then stored directly on the device. 
On startup, the Basic Setup Wizard helps you set up a connection to the WiMAX net-
work and configure your Internet access.

Presentation of the configuration program

To configure your SE680 WiMAX modem, we recommend the Microsoft Internet 
Explorer version 7.0, Mozilla Firefox version 2.0 or their higher versions. However, you 
can also use most other or older Web browsers.

User interface

Open your Web browser.

Enter the IP address of your SE680 WiMAX modem in the address field of your Web 
browser:

http://192.168.2.1

 

Press Enter (Return).

If a system password has been set up on your SE680 WiMAX, the login screen will now 
open. 
Enter the system password supplied by your provider in the text box and click 

Ok

.The 

start page (Home) of the user interface opens, in which you can change the language 
if necessary (

page 18).

Change the system password later to one of your own (see "System password" on 
page 31). 
If no system password has been set up on your SE680 WiMAX, a security warning will 
appear first. You should then assign a system password as soon as possible.

Confirm the security warning with 

Ok

The user interface start page opens.

i

For experienced users:

 

– IP address: 192.168.2.1
– Subnet mask: 255.255.255.0

i

Number and amount of functions and settings provided by the configura-
tion program may differ specific to a project.

Launching the user interface

Summary of Contents for SE680 WiMAX




































































Reviews: