5-8
Cisco SCE 2000 4xGBE Installation and Configuration Guide
OL-7824-07
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configuration
Initial System Configuration
Note
The default password for all levels is “
cisco
”.
Step 1
The default User password is displayed.
•
To accept the displayed value, press
Enter
.
•
To change the value, type any desired character string and press
Enter
.
Step 2
The default Admin password is displayed.
•
To accept the displayed value, press
Enter
.
•
To change the value, type any desired character string and press
Enter
.
Step 3
The default Root password is displayed.
•
To accept the displayed value, press
Enter
.
•
To change the value, type any desired character string and press
Enter
.
Step 4
Configure password encryption. By default, password encryption is not enabled.
•
To disable password encryption, press
Enter
.
•
To enable password encryption, type
y and
press
Enter
.
EXAMPLE:
Following is an example of changing all passwords. Password encryption is not enabled (default).
Enter a User password [cisco]:
userin
Enter an Admin password [cisco]:
mng123
Enter a Root password [cisco]:
cistech
Enable passwords encryption? [no]:
Step 4: How to Configure Time Settings
The time settings menu configures all time and date related parameters in the system. The time settings
menu includes the following:
•
Time zone
•
Local time
•
Date
•
SNTP menu
You must enter the time setting menu in order to configure SNTP settings. You may choose to skip the
time settings menu if you wish to accept all default values.
Note
Unlike all other settings defined in the system configuration, setting the time is done immediately and
Enter the time settings menu.
Would you like to enter the Time settings menu? [no]:
y
Type
y and
press
Enter
.
The time settings dialog begins.
