Cisco RV340 Series, Administration Manual

Page: 19 / 110

•
Tunnel(s) Available
— Available tunnels for the PPTP connection.
The Connection Table
—
shows the status of the established tunnels. You can also connect or disconnect
these connections.
•
Session ID
—
Session ID of the proposed or current connection.
• Username — Name of the connected user.
•
Remote Access
— IP address of the remotely connected or proposed connection.
•
Tunnel IP
—
IP address of the tunnel.
•
Connect Time
—
Time of the tunneling time.
• Action — Connect or disconnect the tunnel.
L2TP Tunnel Status
Layer 2 Tunneling Protocol is the method used to enable Point-to-Point sessions by using the Internet at Layer
2. You can find the status of L2TP Tunnel Status.
•
Tunnel(s) Used
—
L2TP tunnels used for the VPN connection.
•
Tunnel(s) available
—
Available tunnels for the L2TP connection.
The
Connection Table
— Shows the status of the established tunnels. You can also connect or disconnect
these connections.
•
Session ID
— Session ID of the proposed or current connection.
•
Username
—
Name of the connected user.
•
Remote Access
—
IP address of the remotely connected or proposed connection.
•
Tunnel IP
— IP address of the tunnel.
•
Connect Time
—
Time of the tunneling time.
•
Action
—
Connect or disconnect the tunnel.
View Logs
The View Logs page displays all of the device ’ s logs. You can filter these logs based on category, severity,
or keyword. You can also refresh, clear, and export these logs to a PC or USB. To view the device
’
s logs,
follow these steps:
Step 1
Click Status and Statistics > View Logs .
Step 2 Under Logs Filtered By, select the appropriate option.
RV345/345P Administration Guide
13
Status and Statistics
View Logs