Administration
Configuring TR-069 Settings
Cisco RV132W ADSL2+ Wireless-N and RV134W VDSL2 Wireless-AC VPN Router Administration Guide
125
8
To update the
Post-Login Banner Text
fields, enter the login banner text in the text
box. It is displayed on the CLI after user login.
Configuring TR-069 Settings
TR-069 is a DSL Forum specification for the CPE WAN Management Protocol
(CWMP). It defines an application layer protocol for remote management of end-
user devices. As a bidirectional SOAP/HTTP-based protocol, it provides the
communication between customer-premises equipment (CPE) and Auto
Configuration Servers (ACS).
NOTE
The TR069 and GUI management can not work simultaneously. After configuring
the TR069 and saving the settings, logout of the web GUI. Thereafter, the CPE can
initiate the connection to the ACS.
To configure the TR-069 settings:
STEP 1
Click Administration >
TR-069 Settings
. The
TR-069 Settings
page opens.
STEP 2
In the
TR-069 Settings
area, click
Enable
to enable the TR-069 client, or click
Disable
to disable it.
STEP 3
In the
IP Protocol
area, check
IPv4
or
IPv6
protocol.
STEP 4
In the
Inform
area, check
Enable
to enable Inform or
Disable
to disable it.
STEP 5
In the
Inform Interval
field, enter the number in seconds (Default setting is 300).
STEP 6
In the
ACS
area, specify the settings of the ACS remote management server:
•
ACS URL:
Click the ACS URL drop down list to choose ACS URL protocol -
HTTP:// or HTTPS:// and enter the URL.
•
ACS Username:
Enter the username to log in to the ACS remote
management server.
•
ACS Password:
Enter the password to log in to the ACS remote
management server.
•
If the https protocol is selected, complete the following:
•
ACS side CA certificate file import:
Click to import trusted CA certificate
file content.
