Quality of Service (QoS)
Bandwidth Management
Cisco RV132W ADSL2+ Wireless-N and RV134W VDSL2 Wireless-AC VPN Router Administration Guide
117
7
Configuring QoS Binding Policy
In the QoS Binding Table, you can configure QoS policy for upstream traffic.
STEP 1
Click
Add Row
.
STEP 2
Enter information in the following fields to add or edit policy settings:
Policy Name
Name of policy.
Protocol
Select the protocol from the drop-down list. (TCP &
UCP, TCP or UCP).
Source Port
Select the source port from the drop down list. It
can be any port, a single port or port range.
Destination Port
Select the destination port from the drop down list.
It can be any port, a single port or port range.
Source IP
Select the source IP from the drop down list. It can
be any IP address, a single IP address or an IP
address range.
Destination IP
Select the destination IP from the drop down list. It
can be any IP address, a single IP address or an IP
address range.
MAC Address
Select the type of MAC address from the drop
down list. It can be Any or Single MAC address.
This is the MAC address of the source of this traffic.
VLAN ID
Select the
VLAN ID
from the drop-down list. This is
the VLAN ID of the source of this traffic.
Available SSIDs
Select the available
SSIDs
from the drop-down list.
This is the SSID of the source of this traffic.
Physical Port
Select the port (1 -3 for RV132W or
1- 4 for
RV134W
) from the drop-down list. This is the LAN
port of the source of this traffic.
Queue
Set the priority (
1 lowest to 4 highest)
for the
selected category.
Rate Limit (Kbit/Sec):
Enter the rate limit in Kbits per second.
