4-21
PA-E3 Serial Port Adapter Installation and Configuration
OL-3502-04
Chapter 4 Configuring the PA-E3
Checking the Configuration
Catalyst 6000 Family FlexWAN Module—Example Output of the show diag Command
Following is an example of the show diag command that shows a PA-E3 on a Catalyst 6000 family
FlexWAN module:
Router#
show diag
(display text omitted)
Slot 8: Logical_index 17
Board is analyzed ipc ready FlexWAN controller
Slot database information:
Flags: 0x2004Insertion time: unknown
CWAN Controller Memory Size: Unknown
PA Bay 1 Information:
E3 PA port adapter, 2 ports
EEPROM format version 0
HW rev 0.00, Board revision UNKNOWN
Serial number: 00000000 Part number: 00-0000-00
Cisco 7100 Series Routers
Following is an example of the show diag command that shows a Fast Ethernet port adapter in port
adapter slot 3 of a Cisco 7120 series router:
Router#
show diag 3
Slot 3:
10/100 Fast-ethernet with RJ45 Integrated port adapter, 2 ports
Integrated port adapter is analyzed
EEPROM contents at hardware discovery:
Hardware revision 255.255 Board revision UNKNOWN
EEPROM format version 1
EEPROM contents (hex):
0x20:01 D3 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x30:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Note
To use the show diag command with the Cisco 7140 series router, replace the slot argument 3 with 4.
Cisco 7200 Series Routers, Cisco 7200 VXR Routers, and Cisco uBR7200 Series Routers—Example Output of the show diag
Command
Following is an example of the show diag command that shows a PA-E3 in port adapter slot 1 of a
Cisco 7200 series router:
Router#
show diag 1
Slot 1:
E3 PA port adapter, 2 ports
Port adapter is analyzed
Port adapter insertion time 2w0d ago
EEPROM contents at hardware discovery:
Hardware revision 1.0 Board revision B0
Serial number 14061433 Part number 73-2324-03
Test history 0x0 RMA number 00-00-00
EEPROM format version 1
EEPROM contents (hex):
0x20:01 52 01 00 00 D6 8F 79 49 09 14 03 00 00 00 00
