Cisco ONS 15501, User Manual

Page: 74 / 114

4-40
Cisco ONS 15501 User Guide
78-14134-01, Release 1.0
Chapter 4 Command Reference
set-master-pwd
set-master-pwd
To modify the master password for the system, use the set-master-pwd command.
set-master-pwd
Syntax Description
Defaults None
Command Types Changes configuration
Command Modes Master password protected
Command History
Usage Guidelines
This command prompts the user for the old password, and then prompts twice for the new password. The
new password entered for both prompts must match. The default master password is edfa1.
Examples
The following example shows how to modify the master password for the system.
edfa > set-master-pwd
Old Master Password:
New Password:
New Password:
Related Commands
This command has no other arguments or keywords.
Release Modification
EDFA 1.0 This command was introduced.
Command Description
set-user-pwd Sets a new user password for the system.