Cisco ONS 15501, User Manual

Page: 43 / 114

4-9
Cisco ONS 15501 User Guide
78-14134-01, Release 1.0
Chapter 4 Command Reference
gain
gain
To display the measured optical signal gain, use the gain command.
gain
Syntax Description
Defaults None
Command Types Does not change configuration
Command Modes User password protected
Command History
Usage Guidelines
The value for measured optical signal gain is displayed in dB.
Examples
The following example shows how to display the measured optical signal gain.
edfa > gain
17.50 (dB)
Related Commands
This command has no other arguments or keywords.
Release Modification
EDFA 1.0 This command was introduced.
Command Description
gainmean Displays the configured signal gain and alarm mean level.
gaintrig Displays the gain alarm trigger level.
resetmeantrig Resets the signal gain and alarm mean level, gain alarm trigger level, optical
input alarm mean level, optical input alarm trigger level, output signal alarm
mean level, output signal alarm trigger level, internal case temperature
alarm mean level, and internal case temperature alarm trigger level to the
manufacturer’s default settings.
setgainmean Sets the signal gain and alarm mean level.
setgaintrig Sets the gain alarm trigger level.