Cisco ONS 15454, Hardware Installation Manual

Page: 407 / 516

PID Cable
15454-M-CBL-LARG= AC power cable - ARG left exit
15454-M-CBL-RARG= AC power cable - ARG right exit
15454-M-CBL-LAUS= AC power cable - AUS left exit
15454-M-CBL-RAUS= AC power cable - AUS right exit
15454-M-CBL-L-UK= AC power cable - UK left exit
15454-M-CBL-R-UK= AC power cable - UK right exit
15454-M-CBL-LKOR= AC power cable - KOR left exit
15454-M-CBL-RKOR= AC power cable - KOR right exit
15454-M-ACCBL-L= AC power cable ANSI 110VAC left exit
15454-M-ACCBL-R= AC power cable ANSI 110VAC right exit
15454-M-ACCBL-L2= AC power cable ANSI 220VAC left exit
15454-M-ACCBL-R2= AC power cable ANSI 220VAC right exit
15454-M-ACL6-L= AC power cable for data center left exit
15454-M-ACL6-R= AC power cable for data center right exit
DLP-G572 Connect Office Power (DC) to the ONS 15454 M6 Shelf (ANSI Only)
This task connects DC power to the ONS 15454 M6 (ANSI Only). Purpose
• #2 Phillips Dynamometric screwdriver
• Medium slot-head screwdriver
• Small slot-head screwdriver
• Wire wrapper
• Wire cutters
• Wire strippers
• Crimp tool
• Open-end wrench or hex tube screw driver
• Fuse panel
• Power cable (from fuse and alarm panel to assembly), #8 AWG, copper
conductors, 194 degrees F (90 degrees C)
• Ground cable #6 AWG stranded
• Listed pressure dual-holes lugs suitable for #8 AWG copper conductors
Tools/Equipment
Cisco ONS 15454 Hardware Installation Guide
377
Installing the ONS 15454 M6 Shelf
DLP-G572 Connect Office Power (DC) to the ONS 15454 M6 Shelf (ANSI Only)