Cisco ONS 15454, Hardware Installation Manual

Page: 274 / 516

Figure 162: Cable Clip to Secure the Power Cable
Step 4 Connect the power cable to the fuse panel or power source.
The voltage rating value for AC power ranges between 100 VAC to 240 VAC depending on the
standards in various countries. Note
Turn on the power after installing the power cables. Note
Step 5
Return to your originating procedure (NTP).
Table 30: PIDs for AC Power Cables
PID Cable
15454-M-CBL-R-JPN= AC power cable - Japan right exit
15454-M-CBL-R-CHI= AC power cable - China right exit
15454-M-CBL-R-IND= AC power cable - India right exit
15454-M-CBL-R-EU= AC power cable - EU right exit
15454-M-CBL-RARG= AC power cable - ARG right exit
15454-M-CBL-RAUS= AC power cable - AUS right exit
15454-M-CBL-R-UK= AC power cable - UK right exit
15454-M-CBL-RKOR= AC power cable - KOR right exit
15454-M-ACCBL-R= AC power cable ANSI 110VAC right exit
15454-M-ACCBL-R2= AC power cable ANSI 220VAC right exit
15454-M-ACL6-R= AC power cable for data center right exit
DLP-G597 Connect Office Power (DC) to the ONS 15454 M2 Shelf (ANSI Only)
This task connects DC power to the ONS 15454 M2 shelf (ANSI Only). Purpose
Cisco ONS 15454 Hardware Installation Guide
244
Installing the ONS 15454 M2 Shelf
DLP-G597 Connect Office Power (DC) to the ONS 15454 M2 Shelf (ANSI Only)