Cisco ONS 15454, Hardware Installation Manual, Page: 505 / 516

Cisco Transport Controller
CTC, the ONS 15454 M6 craft interface software, has the following specifications:
• 10/100BaseT Ethernet
• TNC/TNCE/TSC/TSCE card access: RJ-45 LAN connector on the controller front plate
• Shelf access: RJ-45 LAN Connector located on the ECU or ECU2
External LAN Interface for EMS
The ONS 15454 M6 external LAN interface has the following specification:
• 10/100BaseT Ethernet located on the ECU or ECU2 and supports:
TL1 Craft Interface
The ONS 15454 M6 TL1 craft interface has the following specifications:
• Speed: 9600 bps
• TNC/TNCE/TSC/TSCE access: EIA/TIA-232 DB-9 type connector
• An alternative RJ-45 LAN connector on TNC/TNCE/TSC/TSCE or ECU or ECU2
Modem Interface
The ONS 15454 M6 modem interface has the following specifications:
• Hardware flow control
• TNC/TNCE/TSC/TSCE: EIA/TIA-232 DB-9 type connector
Alarm Interface
The ONS 15454 M6 alarm interface has the following specifications:
• 2 SCSI Connectors located on the ECU or ECU2
• Visual: Critical, Major, Minor, Remote
• Audible: Critical, Major, Minor, Remote
• Alarm inputs: Common 32-VDC output for all alarm-inputs, closed contact limited to 2 mA
• Control outputs: Open contact maximum 60 VDC, closed contact maximum 100 mA
Passive Unit Remote Inventory
The ONS 15454 M6 provide 12 standard USB ports located on the ECU or ECU2 to retrieve the inventory
data from the passive units.
BITS Interface
The ONS 15454 M6 building integrated timing supply (BITS) interface has the following specifications:
• 2 T1 BITS inputs wire wrap for ANSI applications
Cisco ONS 15454 Hardware Installation Guide
475
Hardware Specifications
Cisco Transport Controller