Cisco ONS 15454, Hardware Installation Manual

Page: 263 / 516

DLP-G593 Install the DC Power Module in the ONS 15454 M2 Shelf
This task installs the DC power module in the ONS 15454 M2 system.
Purpose
#2 Phillips Dynamometric screwdriver Tools/Equipment
• NTP-G266 Install the ONS 15454 M2 Shelf, on page 194 .
• Connect the chassis to the office ground. For detailed instructions on how
to ground the chassis, refer to the Electrostatic Discharge and Grounding
Guide for Cisco CPT and Cisco ONS Platforms .
Prerequisite Procedures
Required Required/As Needed
Onsite Onsite/Remote
None
Security Level
Procedure
Step 1 Insert the DC power module in Slot A (see the following figure).
Figure 156: Installing the DC Power Module
Step 2 Plug the DC power module completely into the chassis.
Step 3
Tighten the screw to a torque value of 4 in-lb (0.45 N-m) to lock the power module in the chassis (see the
following figure).
Cisco ONS 15454 Hardware Installation Guide
233
Installing the ONS 15454 M2 Shelf
DLP-G593 Install the DC Power Module in the ONS 15454 M2 Shelf