18-52
Cisco ONS 15454 SDH Procedure Guide, R7.0
78-17194-01
Chapter 18 DLPs D100 to D199
DLP- D162 Format and Enter NMS Community String for SNMP Command or Operation
Step 6
Return to your originating procedure (NTP).
DLP-D162 Format and Enter NMS Community String for SNMP Command or
Operation
Step 1
If the SNMP “Get” (or other operation) is enabled on the ONS 15454 SDH configured as a GNE, enter
the community name assigned to the GNE in community name field on the MIB browser.
Note
The community name is a form of authentication and access control. The community name of
the NMS must match the community name assigned to the ONS 15454 SDH.
Step 2
If the SNMP “Get” (or other operation) is enabled for the ENE through a SOCKS proxy-enabled GNE,
create a formatted string to enter in the MIB browser community name field. Refer to the following
examples when constructing this string for your browser:
•
Formatted community string input example 1:
allviews{192.168.7.4,,,net7node4}
If “allviews” is a valid community name value at the proxy-enabled SNMP agent (the GNE), the
GNE is expected to forward the PDU to 192.168.7.4 at Port 161. The outgoing PDU will have
“net7node4” as the community name. This is the valid community name for the ENE with address
192.168.7.4.
•
Formatted community string input example 2:
allviews{192.168.7.99,,,enter7{192.168.9.6,161,,net9node6}}
If “allviews” is a valid community name value at the proxy-enabled GNE, the GNE is expected to
forward the PDU to 192.168.7.99 at the default port (Port 161) with a community name of
“enter7{192.168.9.6,161,,net9node6}”. The system with the address 192.168.7.99 (the NE between
the GNE and ENE) forwards this PDU to 192.168.9.6 at Port 161 (at the ENE) with a community
name of “net9node6”. The community name “enter7” is valid for the NE between the GNE and the
ENE and “net9node6” is a valid community name for the ENE.
Step 3
Log into the NMS where the browser is installed to retrieve the network information from the
ONS 15454 SDH.
Step 4
On this computer, go to Start and click the SNMP MIB browser application.
Purpose
This procedure describes how to format a network management system
(NMS) community string to execute the following SNMP commands for
GNEs and ENEs: Get, GetBulk, GetNext, and Set.
Tools/Equipment
None
Prerequisite Procedures
DLP-D60 Log into CTC, page 17-49
Required/As Needed
As needed
Onsite/Remote
Onsite
Security Level
Provisioning or higher
Summary of Contents for ONS 15454 SDH
