Do not mount the left back deflector (exhaust air deflector), if these cards are to be installed in the ONS 15454
M6 shelf:
• 100G-LC-C, 10x10G-LC, or CFP-LC
• EDRA1-26, EDRA1-35, EDRA2-26, or EDRA2-35
Use the standard brackets directly to mount the ONS 15454 M6 shelf.
Step 5
Align the screw holes of the left back air deflector with the screw holes on the left side of the chassis.
Step 6
Insert the screws and tighten them to a torque value of 11.5 in-lb (1.3 N-m).
Step 7
Place the mounting bracket flush in the middle position (see Diagram 1 of
Figure 36: Mounting the Bracket
)
or the front position (see Diagram 3 of
Figure 36: Mounting the Bracket with Air Deflectors (Front-to-Back)
on the ONS 15454 M6 Shelf for ETSI Rack Configuration, on page 39
) against the right side of the chassis.
Step 8
Align the screw holes on the mounting bracket with the screw holes on the left side of the chassis.
Step 9
Insert the screws and tighten them to a torque value of 11.5 in-lb (1.3 N-m).
Step 10
Place the mounting bracket flush in the middle position (see Diagram 1 of
Figure 36: Mounting the Bracket
)
or the front position (see Diagram 3 of
Figure 36: Mounting the Bracket with Air Deflectors (Front-to-Back)
on the ONS 15454 M6 Shelf for ETSI Rack Configuration, on page 39
) against the left side of the chassis.
Step 11
Align the screw holes on the mounting bracket with the screw holes on the left side of the chassis.
Step 12
Insert the screws and tighten them to a torque value of 11.5 in-lb (1.3 N-m).
Figure 35: Mounting the Air Deflectors (Front-to-Back) on the ONS 15454 M6 Shelf for ETSI Rack Configuration
Installing the ONS 15454 M6 Shelf
38
Installing the ONS 15454 M6 Shelf
DLP-G564 Mounting the Bracket with Air Deflectors (Front-to-Back) on the ONS 15454 M6 Shelf for ETSI Rack Configuration
