8-9
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
September 2005
Chapter 8 Manage Alarms
DLP-G117 Change the Maximum Number of Session Entries for Alarm History
c.
Click the
History > Session
tab to view the alarm messages raised during the current session.
d.
Click the
History > Card
tab to retrieve all available alarm messages for the card and click
Retrieve
.
If you check the
Alarms
check box, the node’s alarm history appears. If you check the
Events
check
box, the Not Alarmed and transient event history appears. If you check both boxes, node history for
both alarms and events appears.
Note
The ONS 15454 can store up to 640 critical alarm messages, 640 major alarm messages,
640 minor alarm messages, and 640 condition messages. When any of these limits is
reached, the ONS 15454 discards the oldest events in that category.
Raised and cleared alarm messages (and events, if selected) appear.
Step 5
Return to your originating procedure (NTP).
DLP-G117 Change the Maximum Number of Session Entries for Alarm History
Step 1
From the Edit menu, choose
Preferences
.
The CTC Preferences dialog box appears (
Purpose
This task changes the maximum number of session entries included in the
alarm history. Use this task to expand the history list to save information
for future reference or troubleshooting.
Tools/Equipment
None
Prerequisite Procedures
DLP-G46 Log into CTC, page 2-25
Required/As Needed
As needed
Onsite/Remote
Onsite or remote
Security Level
Provisioning or higher
Summary of Contents for ONS 15454 DWDM
Page 38: ...Figures xxxviii Cisco ONS 15454 DWDM Installation and Operations Guide R6 0 August 2005 ...
Page 54: ...Procedures liv Cisco ONS 15454 DWDM Installation and Operations Guide R6 0 August 2005 ...
Page 64: ... 64 Cisco ONS 15454 DWDM Installation and Operations Guide R6 0 August 2005 Chapter ...