1-22
Cisco ONS 15454 DWDM Procedure Guide, R8.0
78-17704-02
Chapter 1 Install the Shelf and Common Control Cards
NTP- G9 Open the Front Cabinet Compartment (Door)
Stop. You have completed this procedure.
DLP-G9 Open the Front Cabinet Compartment (Door)
Note
The ONS 15454 shelf assembly has an ESD plug input and is shipped with an ESD wrist strap. The ESD
plug input is located on the outside of the shelf assembly on the right side. It is labeled “ESD” on the
top and bottom. Always wear an ESD wrist strap and connect the strap to the ESD plug when working
on the ONS 15454.
Step 1
Open the front door lock.
The ONS 15454 shelf assembly comes with a pinned hex key for locking and unlocking the front door.
Turn the key counterclockwise to unlock the door and clockwise to lock it.
illustrates the front
door of the ANSI shelf.
Purpose
This task opens the front door.
Tools/Equipment
Pinned hex (Allen) key
Prerequisite Procedures
NTP-G2 Install the Shelf Assembly, page 1-8
Required/As Needed
Required
Onsite/Remote
Onsite
Security Level
None
