Cisco ONS 15327, User Documentation

Page: 92 / 559

2-10
Cisco ONS 15327 User Documentation
June 2002
Chapter 2 Software Installation
Running the CTC Installation Wizard
After you have determined which method you will use to connect to the ONS 15327, find the necessary
procedures in
Table 2-4 .
Table 2-3 ONS 15327 Connection Methods
Method Description Requirements
Local craft Refers to onsite network connections
between the CTC computer and the
ONS 15327 using:
•
The RJ-45 jack on the XTC, or
•
A hub or switch to which the ONS 15327
is connected.
•
If you do not use DHCP, you will need
to change the computer IP address,
subnet mask, and default router.
Corporate
LAN Refers to a connection to the ONS 15327
through a corporate or NOC LAN.
•
The ONS 15327 must be provisioned
for LAN connectivity, including IP
address, subnet mask, and default
gateway.
•
The ONS 15327 must be physically
connected to the corporate LAN.
•
The CTC computer must be connected
to the corporate LAN that has
connectivity to the ONS 15327.
TL1 Refers to a connection to the ONS 15327
using TL1 rather than CTC. TL1 sessions can
be started from CTC, or you can use a TL1
terminal. The physical connection can be a
craft connection, corporate LAN, or a TL1
terminal. Refer to the
Cisco ONS 15454 and
Cisco ONS 15327 TL1 Command Guide .
Remote Refers to a connection made to the
ONS 15327 using a modem. • A modem must be connected to the
ONS 15327.
•
The modem must be provisioned for
ONS 15327. To run CTC, the modem
must be provisioned for Ethernet
access.