Cisco ONS 15327, User Documentation

Page: 142 / 559

3-16
Cisco ONS 15327 User Documentation, R3.3
June 2002
Chapter 3 Node Setup
Viewing ONS 15327 Inventory
•
Revertive Time —The default setting (5 minutes) is sufficient.
Step 4 In the BITS Facilities section, enter the following information:
•
State— Set BITS 1 and BITS 2 to OOS (Out of Service).
•
Coding —Is not relevant for internal timing. The default (B8ZS) is sufficient.
•
Framing —Is not relevant for internal timing. The default (ESF) is sufficient.
• Sync Messaging —Checked
•
AIS Threshold— Is not available.
• LBO— Is not relevant for internal timing.
Step 5
In the Reference Lists section, enter the following information:
•
NE Reference:
–
Ref1—Set to Internal Clock.
– Ref2—Set to Internal Clock.
–
Ref3—Set to Internal Clock.
• BITS 1 Out/BITS 2 Out —Set to None
Step 6
Click Apply .
Step 7
Log into a node that will be timed from the node set up in Steps 1–4.
Step 8
In the CTC node view, click the Provisioning > Timing tabs.
Step 9 In the General Timing section, enter the same information as entered in Step 3, except for the following:
•
Timing Mode —Set to Line.
Reference Lists:
•
NE Reference :
–
Ref1—Set to the OC-N trunk card with the closest connection to the node in Step 3.
–
Ref2—Set to the OC-N trunk card with the next closest connection to the node in Step 3.
– Ref3—Set to Internal Clock.
Step 10
Click Apply .
Step 11 Repeat Steps 7–10 at each node that will be timed by the node in Step 3.
3.7 Viewing ONS 15327 Inventory
The Inventory tab ( Figure 3-6 ) displays information about cards installed in the ONS 15327 node
including part numbers, serial numbers, hardware revisions, and equipment types. The tab provides a
central location to obtain information and to determine applicability of ONS 15327 Product Change
Notices (PCNs) and Field Service Bulletins (FSBs). Using the ONS 15327 export feature, you can export
inventory data from ONS 15327 nodes into spreadsheet and database programs to consolidate ONS
15327 information for network inventory management and reporting.