Cisco ONS 15327, User Documentation

Page: 133 / 559

3-7
Cisco ONS 15327 User Documentation, R3.3
June 2002
Chapter 3 Node Setup
Creating Protection Groups
Procedure: Edit a User
Step 1 In network view, select the Provisioning > Security tabs.
Step 2
Click Change .
Step 3
On the Change User dialog box, edit the user information: name, password, password confirmation,
and/or security level. (A Superuser does not need to enter an old password. Other users must enter their
old password when changing their own passwords.)
Note You cannot change the CISCO15 user name. The CISCO15 password can and should be
changed if you need to restrict the number of superusers accessing the ONS 15327.
Step 4
If you do not want the user changes to apply to all network nodes, deselect the unchanged nodes in the
Change Users dialog box.
Step 5
Click OK .
Changed user permissions and access levels do not take effect until the user logs out of CTC and logs
back in.
Procedure: Delete a User
Step 1
In network view, select the Provisioning > Security tabs.
Step 2
Click Delete .
Step 3 On the Delete User dialog box, enter the name of the user you want to delete.
Step 4
If you do not want to delete the user from all network nodes, deselect the nodes.
Step 5 Click OK and click Apply .
3.5 Creating Protection Groups
The ONS 15327 provides several card protection methods. When you set up protection for ONS 15327
cards, you must choose between maximum protection and maximum slot availability. The highest
protection reduces the number of available card slots; the highest slot availability reduces the protection.
Table 3-3 shows the protection types that can be set up for ONS 15327 cards. For a description of
protection groups, see the “Card Protection” section on page 13-2 .
For the ONS 15327, a 1:1 (electrical) XTC protection group is pre-provisioned. The name of the protection
group is XTCPROTGRP and it cannot be edited or deleted. Therefore, you only need to create protection for
optical cards.