Cisco ONS 15327, User Documentation

Page: 110 / 559

2-28
Cisco ONS 15327 User Documentation
June 2002
Chapter 2 Software Installation
Working with the CTC Window
Procedure: Set the IIOP Listener Port on the ONS 15327
Step 1 Log into the ONS 15327 node from a CTC computer that is behind the firewall.
Step 2
In node view, select the Provisioning > Network tabs.
Step 3
On the General subtab under XTC card CORBA (IIOP) Listener Port, select a listener port option:
•
Default - XTC Fixed —Used to connect to ONS 15327s on the same side of the firewall or if no
firewall is used
•
Standard Constant —Uses port 683, the CORBA default port number
•
Other Constant —Allows you to set an IIOP port specified by your firewall administrator
Step 4 Click Apply to apply the change.
Step 5
When the Change Network Configuration? message displays, click Yes .
Both ONS 15327 XTC cards will reboot, one at a time.
Procedure: Set the IIOP Listener Port on CTC
Step 1 From the CTC Edit menu, select Preferences .
Step 2
On the Preferences dialog box, select the Firewall tab.
Step 3 Under CTC CORBA (IIOP) Listener Port, set the listener port option:
•
Default - Variable —Used to connect to ONS 15327s from within a firewall or if no firewall is used
•
Standard Constant —Uses port 683, the CORBA default port number
•
Other Constant —Allows you to specify an IIOP port defined by your administrator
Step 4 Click OK to apply the change and close the dialog box.
2.6 Working with the CTC Window
The CTC window (screen) displays after you log into an ONS 15327 ( Figure 2-6 ). The window includes
a menu bar, toolbar, and a top and bottom pane. The top pane displays status information about the
selected objects and a graphic of the current view. The bottom pane displays tabs and subtabs, which you
use to view ONS 15327 information and perform ONS 15327 provisioning and maintenance. From this
window you can display three ONS 15327 views: network, node, and card.