manualshive.com logo in svg

Cisco Nexus 5000 Series, Cli Configuration Manual, Page: 92 / 660

Share
Download
Cisco Nexus 5000 Series Cli Configuration Manual Download Page 92

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-8

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Configuring Ethernet Interfaces

Configuring Ethernet Interfaces

Disabling and Restarting Ethernet Interfaces

You can shut down and restart an Ethernet interface. This action disables all of the interface functions 
and marks the interface as being down on all monitoring displays. This information is communicated to 
other network servers through all dynamic routing protocols. When shut down, the interface is not 
included in any routing updates. 

To disable an interface, perform this task:

The following example shows how to disable an Ethernet port:

switch# 

configure terminal

 

switch(config)# 

interface ethernet 1/4

 

switch(config-if)# 

shutdown

 

To restart an interface, perform this task:

The following example shows how to restart an Ethernet interface:

switch# 

configure terminal

 

switch(config)# 

interface ethernet 1/4

 

switch(config-if)# 

no shutdown

 

Command

Purpose

Step 1

switch# 

configure terminal

 

Enters configuration mode.

Step 2

switch(config)# 

interface

 

type

 

slot

/

port

 

Enters interface configuration mode for the specified 
interface.

Step 3

switch(config-if)# 

shutdown

 

Disables the interface.

Command

Purpose

switch(config-if)# 

no

 

shutdown

 

Restarts the interface.

Summary of Contents for Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments