manualshive.com logo in svg

Cisco Nexus 5000 Series, Cli Configuration Manual, Page: 567 / 660

Share
Download
Cisco Nexus 5000 Series Cli Configuration Manual Download Page 567

C H A P T E R

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-1

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

1

Advanced Fibre Channel Features and Concepts

This chapter describes the advanced Fibre Channel features provided in Cisco Nexus 5000 Series 
switches. It includes the following sections:

•

Fibre Channel Timeout Values, page 1-1

•

World Wide Names, page 1-5

•

FC ID Allocation for HBAs, page 1-7

•

Switch Interoperability, page 1-9

•

Default Settings, page 1-15

Fibre Channel Timeout Values

You can modify Fibre Channel protocol-related timer values for the switch by configuring the following 
timeout values (TOVs):

•

Distributed services TOV (D_S_TOV)—The valid range is from 5,000 to 10,000 milliseconds. The 
default is 5,000 milliseconds.

•

Error detect TOV (E_D_TOV)—The valid range is from 1,000 to 10,000 milliseconds. The default 
is 2,000 milliseconds. This value is matched with the other end during port initialization.

•

Resource allocation TOV (R_A_TOV)—The valid range is from 5,000 to 10,000 milliseconds. The 
default is 10,000 milliseconds. This value is matched with the other end during port initialization.

Note

The fabric stability TOV (F_S_TOV) constant cannot be configured.

This section includes the following topics:

•

Timer Configuration Across All VSANs, page 1-2

•

Timer Configuration Per-VSAN, page 1-2

•

About fctimer Distribution, page 1-3

•

Enabling or Disabling fctimer Distribution, page 1-3

•

Committing fctimer Changes, page 1-3

•

Discarding fctimer Changes, page 1-4

•

Fabric Lock Override, page 1-4

Summary of Contents for Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments