manualshive.com logo in svg

Cisco Nexus 5000 Series, Cli Configuration Manual, Page: 560 / 660

Share
Download
Cisco Nexus 5000 Series Cli Configuration Manual Download Page 560

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-8

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Managing FLOGI, Name Server, FDMI, and RSCN Databases

RSCN

RSCN Timer Configuration Distribution

Because the timeout value for each switch is configured manually, a misconfiguration occurs when 
different switches time out at different times. This means different N-ports in a network can receive 
RSCNs at different times. Cisco Fabric Services (CFS) infrastructure alleviates this situation by 
automatically distributing the RSCN timer configuration information to all switches in a fabric. This also 
reduces the number of SW-RSCNs. For additional information, see 

Chapter 1, “Using Cisco Fabric 

Services.”

RSCN supports two modes, distributed and nondistributed. In distributed mode, RSCN uses CFS to 
distribute configuration to all switches in the fabric. In nondistributed mode, only the configuration 
commands on the local switch are affected. 

Note

All configuration commands are not distributed. Only the 

rscn event-tov 

tov

 vsan 

vsan

 command is 

distributed. 

Note

Only the RSCN timer configuration is distributed. 

The RSCN timer is registered with CFS during initialization and switchover. For high availability, if the 
RSCN timer distribution crashes and restarts or a switchover occurs, it resumes normal functionality 
from the state prior to the crash or switchover. 

This section includes the following topics:

•

Enabling RSCN Timer Configuration Distribution, page 1-8

•

Locking the Fabric, page 1-9

•

Committing the RSCN Timer Configuration Changes, page 1-9

•

Discarding the RSCN Timer Configuration Changes, page 1-9

•

Clearing a Locked Session, page 1-9

•

Displaying RSCN Configuration Distribution Information, page 1-10

Enabling RSCN Timer Configuration Distribution

To enable RSCN timer configuration distribution, perform this task:

Command

Purpose

Step 1

switch# 

configuration terminal 

switch(config)# 

Enters configuration mode.

Step 2

switch(config)# 

rscn distribute 

Enables RSCN timer distribution.

switch(config)# 

no

 

rscn distribute 

Disables (default) RSCN timer distribution.

Summary of Contents for Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments