manualshive.com logo in svg

Cisco Nexus 5000 Series, Cli Configuration Manual, Page: 545 / 660

Share
Download
Cisco Nexus 5000 Series Cli Configuration Manual Download Page 545

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-11

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Configuring Fibre Channel Routing Services and Protocols

In-Order Delivery

This section includes the following topics:

•

About Reordering Network Frames, page 1-11

•

About Reordering SAN Port Channel Frames, page 1-11

•

About Enabling In-Order Delivery, page 1-12

•

Enabling In-Order Delivery Globally, page 1-12

•

Enabling In-Order Delivery for a VSAN, page 1-13

•

Displaying the In-Order Delivery Status, page 1-13

•

Configuring the Drop Latency Time, page 1-14

•

Displaying Latency Information, page 1-14

About Reordering Network Frames

When you experience a route change in the network, the new selected path may be faster or less 
congested than the old route.

Figure 1-4

Route Change Delivery 

In 

Figure 1-4

, the new path from Switch 1 to Switch 4 is faster. In this scenario, Frame 3 and Frame 4 

may be delivered before Frame 1 and Frame 2.

If the in-order guarantee feature is enabled, the frames within the network are delivered as follows:

•

Frames in the network are delivered in the order in which they are transmitted.

•

Frames that cannot be delivered in order within the network latency drop period are dropped inside 
the network.

About Reordering SAN Port Channel Frames

When a link change occurs in a SAN port channel, the frames for the same exchange or the same flow 
can switch from one path to another faster path.

Switch 1

Switch 2

Switch 3

Switch 4

Frame 2

Frame 1

Frame 4 Frame 3

Old path

New path

85474

Summary of Contents for Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments