manualshive.com logo in svg

Cisco Nexus 5000 Series, Cli Configuration Manual, Page: 532 / 660

Share
Download
Cisco Nexus 5000 Series Cli Configuration Manual Download Page 532

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-8

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Distributing Device Alias Services

About Legacy Zone Alias Configuration

The following example shows the device alias display when distribution is disabled:

switch# 

show

 

device-alias status

Fabric Distribution: 

Disabled

Database:- Device Aliases 24

Status of the last CFS operation issued from this switch:

==========================================================

Operation: Disable Fabric Distribution

Status: Success

About Legacy Zone Alias Configuration

You can import legacy zone alias configurations to use this feature without losing data if they satisfy the 
following restrictions:

•

Each zone alias has only one member.

•

The member type is pWWN.

If any name or definition conflict exists, the zone aliases are not imported.

Tip

Ensure that you copy any required zone aliases to the device alias database as required by your 
configuration.

When an import operation is complete, the modified alias database is distributed to all other switches in 
the physical fabric when you perform the 

commit

 operation. If you do not want to distribute the 

configuration to other switches in the fabric, you can perform the 

abort

 operation and the merge changes 

are completely discarded.

Importing a Zone Alias

To import the zone alias for a specific VSAN, perform this task:

Database Merge Guidelines

When merging two device alias databases, follow these guidelines:

•

Verify that two device aliases with different names are not mapped to the same pWWN.

•

Verify that two identical pWWNs are not mapped to two different device aliases.

•

Verify that the combined number of device aliases in both databases does not exceed 8K (8191 
device aliases) in fabrics running Cisco MDS SAN-OS release 3.0 (x) and earlier, and 20K in fabrics 
running Cisco MDS SAN-OS release 3.1(x) and later.

Command

Purpose

Step 1

switch# 

configuration terminal 

switch(config)# 

Enters configuration mode.

Step 2

switch(config)# 

device-alias import fcalias 

vsan 

vlan-id

Imports the fcalias information for the specified 
VSAN.

Summary of Contents for Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments