manualshive.com logo in svg

Cisco Nexus 5000 Series, Cli Configuration Manual, Page: 468 / 660

Share
Download
Cisco Nexus 5000 Series Cli Configuration Manual Download Page 468

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-6

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Configuring VSAN Trunking

Displaying VSAN Trunking Information

Figure 1-5

Operational and Allowed VSAN Configuration

Configuring an Allowed-Active List of VSANs

To configure an allowed-active list of VSANs for an interface, perform this task:

Displaying VSAN Trunking Information

The 

show interface 

command is invoked from the EXEC mode and displays VSAN trunking 

configurations for a TE port. Without any arguments, this command displays the information for all of 
the configured interfaces in the switch. 

VSANs 1 

and 3 are on th

e allo

we

d list

. 

VS

ANs 1 and 3 are oper

atio

nal

. 

VSA

Ns

 1, 2, 5 a

re o

pera

tion

al. 

VSA

Ns

 1, 2, 5 are o

n th

e all

owe

d list.

 

VSANs 1 and 2 are oper

ational.

VSANs 1 and 2 are on the allo

w

ed list.

Switch 3

VSAN1
VSAN2
VSAN4
VSAN5

Switch 1

VSAN1
VSAN2
VSAN3
VSAN4
VSAN5

Switch 2

VSAN1
VSAN2
VSAN3

79946

Command

Purpose

Step 1

switch# 

configuration terminal

Enters configuration mode.

Step 2

switch(config)# 

interface

 

fc 

slot/port

switch(config-if)# 

Configures the specified interface.

Step 3

switch(config-if)# 

switchport trunk allowed vsan 

vsan-id 

- 

vsan-id

Changes the allowed list for the 
specified VSAN range.

switch(config-if)# 

switchport trunk allowed vsan add 

vsan-id

updated trunking membership

Expands the specified VSAN to the 
new allowed list.

switch(config-if)# 

no switchport trunk allowed vsan 

vsan-id 

- 

vsan-id

Deletes the specified VSAN range.

switch(config-if)# 

no switchport trunk allowed vsan add 

vsan-id

Deletes the expanded allowed list.

Summary of Contents for Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments