Cisco Nexus 5000 Series, Cli Configuration Manual, Page: 383 / 660

S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
1-5
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 1 Configuring RMON
Verifying RMON Configuration
Verifying RMON Configuration
To display RMON configuration information, perform one of the following tasks:
RMON Example Configuration
This example creates a delta rising alarm on ifInOctets.14 and associates a notification event with this
alarm:
configure terminal
rmon alarm 20 1.3.6.1.2.1.2.2.1.14 2900 delta rising-threshold 1500 1 falling-threshold 0
owner test
rmon event 1 trap
Related Topics
See the following related topics:
•
Configuring SNMP, page 1-5 .
Default Settings
Table 1-1 lists the default settings for RMON parameters.
Step 3
switch(config)# show rmon { alarms |
hcalarms }
(Optional) Displays information about RMON alarms
or high-capacity alarms.
Step 4
switch(config)# copy running-config
startup-config
(Optional) Saves this configuration change.
Command Purpose
Command Purpose
show rmon alarms
Displays information about RMON alarms.
show rmon events
Displays information about RMON events.
show rmon hcalarms
Displays information about RMON hcalarms.
show rmon logs
Displays information about RMON logs.
Table 1-1 Default RMON Parameters
Parameters Default
Alarms None configured
events None configured