manualshive.com logo in svg

Cisco Nexus 5000 Series, Cli Configuration Manual, Page: 349 / 660

Share
Download
Cisco Nexus 5000 Series Cli Configuration Manual Download Page 349

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-9

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Configuring Smart Call Home

Configuring Call Home

This example shows how to configure the contact information for Call Home:

switch# 

configuration terminal

switch(config)# 

snmp-server contact [email protected] 

switch(config)# 

callhome

switch(config-callhome)# 

email-contact [email protected]

switch(config-callhome)# 

phone-c1-800-123-4567

switch(config-callhome)# 

street-address 123 Anystreet st. Anytown,AnyWhere 

Creating a Destination Profile

To create a user-defined destination profile and configure the message format for that new destination 
profile, perform this task:

This example shows how to create a destination profile for Call Home:

switch# 

configuration terminal

switch(config)# 

callhome

switch(config-callhome)# 

destination-profile Noc101 format full-text

Modifying a Destination Profile

You can modify the following attributes for a predefined or user-defined destination profile:

•

Destination address—The actual address, pertinent to the transport mechanism, to which the alert 
should be sent.

•

Message formatting—The message format used for sending the alert (full text, short text, or XML).

•

Message level—The Call Home message severity level for this destination profile.

•

Message size—The allowed length of a Call Home message sent to the e-mail addresses in this 
destination profile.

See the 

“Associating an Alert Group with a Destination Profile” section on page 1-10

 for information on 

configuring an alert group for a destination profile.

Command

Purpose

Step 1

switch# 

configuration terminal

Enters configuration mode.

Step 2

switch(config)# 

callhome

Enters callhome configuration mode.

Step 3

switch(config-callhome)# 

destination-profile 

name 

format 

{

XML

 | 

full-txt 

| 

short-txt

}

Creates a new destination profile and sets the message 
format for the profile. The name can be any 
alphanumeric string up to 31 characters.

Step 4

switch(config-callhome)# 

show callhome 

destination-profile 

[

profile

 

name

]

(Optional) Displays information about one or more 
destination profiles.

Step 5

switch(config)# 

copy running-config 

startup-config

(Optional) Saves this configuration change.

Summary of Contents for Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments