manualshive.com logo in svg

Cisco Nexus 5000 Series, Cli Configuration Manual, Page: 284 / 660

Share
Download
Cisco Nexus 5000 Series Cli Configuration Manual Download Page 284

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-10

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Configuring ACLs

Configuring MAC ACLs

•

Removing a MAC ACL, page 1-11

•

Changing Sequence Numbers in a MAC ACL, page 1-12

•

Applying a MAC ACL as a Port ACL, page 1-12

•

Applying a MAC ACL as a VACL, page 1-13

•

Verifying MAC ACL Configurations, page 1-13

•

Displaying and Clearing MAC ACL Statistics, page 1-13

Creating a MAC ACL

To create a MAC ACL and add rules to it, perform this task:

The following example shows how to create a MAC ACL and add rules to it:

switch# 

configure terminal

switch(config)# 

mac access-list acl-mac-01

switch(config-mac-acl)# 

permit 00c0.4f00.0000 0000.00ff.ffff any

switch(config-mac-acl)# 

statistics

switch(config-mac-acl)# 

show mac access-lists

 

acl-mac-01

switch(config-mac-acl)# 

copy running-config startup-config

Changing a MAC ACL

In an existing MAC ACL, you can  add and remove rules. You cannot change existing rules. Instead, to 
change a rule, you can remove it and recreate it with the desired changes.

Command

Purpose

Step 1

switch# 

configure terminal

Enters global configuration mode.

Step 2

switch# 

mac

 

access-list

 

name

Creates the MAC ACL and enters ACL 
configuration mode.

Step 3

switch(config-mac-acl)# {

permit

 | 

deny

}

 

source

 

destination protocol

Creates a rule in the MAC ACL.

The 

permit

 and 

deny

 options support many ways of 

identifying traffic. For more information, see the 

Cisco Nexus 5000 Series Command Reference

.

Step 4

switch(config-mac-acl)# 

statistics

(Optional) Specifies that the switch maintains 
global statistics for packets matching the rules in 
the ACL.

Step 5

switch(config-mac-acl)# 

show mac 

access-lists

 

name

(Optional) Displays the MAC ACL configuration.

Step 6

switch(config-mac-acl)# 

copy 

running-config startup-config

(Optional) Copies the running configuration to the 
startup configuration.

Summary of Contents for Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments