manualshive.com logo in svg

Cisco Nexus 5000 Series, Cli Configuration Manual, Page: 229 / 660

Share
Download
Cisco Nexus 5000 Series Cli Configuration Manual Download Page 229

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-11

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Configuring AAA

Configuring AAA

To configure AAA accounting default methods, perform this task:

Using AAA Server VSAs with Nexus 5000 Series Switches

You can use vendor-specific attributes (VSAs) to specify the Nexus 5000 Series user roles and SNMPv3 
parameters on AAA servers. 

This section includes the following topics:

•

About VSAs, page 1-11

•

VSA Format, page 1-12

•

Specifying Nexus 5000 Series switch User Roles and SMNPv3 Parameters on AAA Servers, 
page 1-12

About VSAs

The Internet Engineering Task Force (IETF) draft standard specifies a method for communicating VSAs 
between the network access server and the RADIUS server. The IETF uses attribute 26. VSAs allow 
vendors to support their own extended attributes that are not suitable for general use. The Cisco RADIUS 

Command

Purpose

Step 1

switch# 

configure terminal

Enters configuration mode.

Step 2

switch(config)# 

aaa accounting default 

{

group 

group-list 

| 

local

}

Configures default accounting method. One or more 
server group names can be specified in a space 
separated list. 

The 

group-list

 argument consists of a 

space-delimited list of group names. The group 
names are of the following:

•

radius

—Uses the global pool of RADIUS 

servers for accounting.

•

named-group

—Uses a named subset of 

or RADIUS servers for accounting.

The 

local

 method uses the local database for 

accounting.

The default method is 

local, 

which is used when no 

server groups are configured or when all the 
configured server group do not respond.

Step 3

switch(config)# 

exit

Exits configuration mode.

Step 4

switch# 

show aaa accounting

(Optional) Displays the configuration AAA 
accounting default methods.

Step 5

switch# 

copy running-config startup-config

(Optional) Copies the running configuration to the 
startup configuration. 

Summary of Contents for Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments