manualshive.com logo in svg

Cisco Nexus 5000 Series, Cli Configuration Manual, Page: 228 / 660

Share
Download
Cisco Nexus 5000 Series Cli Configuration Manual Download Page 228

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-10

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Configuring AAA

Configuring AAA

To enable MSCHAP authentication, perform this task:

Configuring AAA Accounting Default Methods

The Nexus 5000 Series switch supports and RADIUS methods for accounting. The switches 
report user activity to  or RADIUS security servers in the form of accounting records. Each 
accounting record contains accounting attribute-value (AV) pairs and is stored on the AAA server.

When you activate AAA accounting, the Nexus 5000 Series switch reports these attributes as accounting 
records, which are then stored in an accounting log on the security server. 

You can create default method lists defining specific accounting methods, which include the following:.

•

RADIUS server group—Uses the global pool of RADIUS servers for accounting.

•

Specified server group—Uses a specified RADIUS or  server group for accounting.

•

Local—Uses the local username or password database for accounting.

Note

If you have configured server groups and the server groups do not respond, by default the local database 
is used for authentication.

Before you configure AAA accounting default methods, configure RADIUS or  server groups 
as needed. 

Table 1-3

MSCHAP RADIUS VSAs

Vendor-ID 
Number Vendor-Type 

Number 

VSA 

Description 

311

11

 MSCHAP-Challenge

Contains the challenge sent by an AAA server to an 
MSCHAP user. It can be used in both 
Access-Request and Access-Challenge packets.

211

11

 MSCHAP-Response

Contains the response value provided by an 
MSCHAP user in response to the challenge. It is 
only used in Access-Request packets.

Command

Purpose

Step 1

switch# 

configure terminal

Enters configuration mode.

Step 2

switch(config)# 

aaa authentication login 

mschap enable

Enables MS-CHAP authentication. The default is 
disabled.

Step 3

switch(config)# 

exit

Exits configuration mode.

Step 4

switch# 

show aaa authentication login 

mschap

(Optional) Displays the MS-CHAP configuration.

Step 5

switch# 

copy running-config 

startup-config

(Optional) Copies the running configuration to the 
startup configuration. 

Summary of Contents for Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments