418
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show forwarding
show forwarding
To display forwarding information, use the
show forwarding
command.
show forwarding
[
ipv4
] {
adjacency
|
interfaces
|
pss
|
route
|
table
id
|
trace
[
clear
]}
[
vrf
vrf-name
]
Syntax Description
Command Default
None
Command Modes
Any command mode
Command History
Usage Guidelines
Use the
show forwarding
command on the supervisor to view forwarding information on a module.
Optionally, you can use the
attach module
command to attach to a module and use the
show forwarding
command on the module.
This command does not require a license.
Examples
This example shows how to display the forwarding information:
switch#
show forwarding route
IPv4 routes for table default/base
------------------+------------------+---------------------
Prefix | Next-hop | Interface
------------------+------------------+---------------------
ipv4
(Optional) Displays the IPv4 forwarding information.
adjacency
Displays the adjacency information.
interfaces
Displays the forwarding information for interfaces on a module.
pss
Displays route information from persistent storage.
route
Displays the route information from the IP routing table.
table
id
Displays the forwarding information for a route table. The
id
range is from 0 to
2147483647.
trace
Displays the forwarding trace buffer on a module.
clear
(Optional) Clears the forwarding trace buffer on a module.
vrf
vrf-name
(Optional) Specifies the name of the virtual routing and forwarding (VRF)
instance. The
vrf-name
argument can be specified as any case-sensitive,
alphanumeric string up to 32 characters. The strings “default” and “all” are
reserved VRF names.
Release
Modification
5.0(3)A1(1)
This command was introduced.
