410
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show bgp community-list
show bgp community-list
To display Border Gateway Protocol (BGP) routes that match a community list, use the
show bgp
community-list
command.
show bgp
{{
ip
|
ipv4
} {
unicast
|
multicast
}}
community-list
commlist-name
[
exact-match
] [
vrf
vrf-name
]
Syntax Description
Command Default
None
Command Modes
Any command mode
Command History
Usage Guidelines
This command requires the LAN Enterprise Services license.
Examples
This example shows how to display the routes that match a community list:
switch(config)#
show bgp ip unicast community-list test1
Related Commands
ip
Displays BGP information for the IPv4 address family.
ipv4
Displays BGP information for the IPv4 address family.
unicast
Displays BGP information for the unicast address family.
multicast
Displays BGP information for the multicast address family.
commlist-name
Name of a community-list. The commlist-name can be any case-sensitive,
alphanumeric string up to 63 characters.
exact-match
(Optional) Displays an exact match of the communities.
vrf
vrf-name
(Optional) Specifies the virtual router context (VRF) name. The name can be any
case-sensitive, alphanumeric string up to 32 characters.
Release
Modification
5.0(3)A1(1)
This command was introduced.
Command
Description
ip community-list
Creates a community list.
