340
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
set level
set level
To indicate where to import routes, use the
set level
command. To delete an entry, use the
no
form of
this command.
set level
{
level-1
|
level-2
|
level-1-2
}
no set level
{
level-1
|
level-2
|
level-1-2
}
Syntax Description
Command Default
This command is disabled by default.
Command Modes
Route-map configuration mode
Command History
Usage Guidelines
Use the
route-map
global configuration command and the
match
and
set
route-map configuration
commands to define the conditions for redistributing routes from one routing protocol into another. Each
route-map
command has a list of
match
and
set
commands associated with it. The
match
commands
specify the match criteria—the conditions under which redistribution is allowed for the current
route-map
command. The
set
commands specify the set actions—the particular redistribution actions
to perform if the criteria enforced by the
match
commands are met. The
no route-map
command deletes
the route map.
The
set
route-map configuration commands specify the redistribution set actions to be performed when
all the match criteria of a route map are met. When all match criteria are met, all set actions are
performed.
This command requires the LAN Enterprise Services license.
Examples
This example shows how to import the routes into the Level 1 area:
switch#
configure terminal
switch(config)#
route-map testcase
switch(config-route-map)#
set level level-l
switch(config-route-map)
level-1
Imports routes into a Level 1 area.
level-2
Imports routes into a Level 2 subdomain.
level-1-2
Imports routes into Level 1 and Level 2.
Release
Modification
5.0(3)A1(1)
This command was introduced.
