![Cisco Nexus 3548 series Command Reference Manual Download Page 355](http://html.mh-extra.com/html/cisco/nexus-3548-series/nexus-3548-series_command-reference-manual_2609162355.webp)
335
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
set extcomm-list delete
set extcomm-list delete
To remove extended communities from the extended community attribute of an inbound or outbound
Border Gateway Protocol (BGP) update, use the
set extcomm-list delete
command. To remove a
previous
set extcomm-list delete
command, use the
no
form of this command.
set extcomm-list
community-list-name
delete
no set extcomm-list
Syntax Description
Command Default
No communities are removed.
Command Modes
Route-map configuration mode
Command History
Usage Guidelines
You must have a match clause in a route map (even if it points to a “permit everything” list) if you want
to use
set
commands.
The
set
commands specify the set actions to be performed when all of the match criteria of a route map
are met. When all match criteria are met, all set actions are performed.
When you configure both the
set extcommunity
community-number
and
set ext comm-list delete
commands in the same sequence of a route map attribute, the deletion operation (
set extcomm-list
delete
) is performed before the set operation (
set extcommunity
community-number
).
This command requires the LAN Enterprise Services license.
Examples
This example shows how to remove extended communities from the extended community attribute of an
inbound or outbound update:
switch#
configure terminal
switch(config)#
route-map test1
switch(config-route-map)#
match as-path 1
switch(config-route-map)#
set extcomm-list list1 delete
switch(config-route-map)#
community-list-name
Standard or expanded extended community list name. The name is any
alphanumeric string up to 63 characters.
Release
Modification
5.0(3)A1(1)
This command was introduced.