245
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
match route-type
match route-type
To redistribute routes of the specified type, use the
match route-type
command. To remove the route
type entry, use the
no
form of this command.
match route-type
{
external
|
internal
|
local
|
nssa-external
|
type-1
|
type-2
}
no match route-type
{
external
|
internal
|
local
|
nssa-external
|
type-1
|
type-2
}
Syntax Description
Command Default
Disabled
Command Modes
Route-map configuration mode
Command History
Usage Guidelines
Use the
route-map
global configuration command and the
match
and
set
route-map configuration
commands to define the conditions for redistributing routes from one routing protocol into another. Each
route-map
command has a list of
match
and
set
commands associated with it. The
match
commands
specify the match criteria—the conditions under which redistribution is allowed for the current
route-map
command. The
set
commands specify the set actions—the particular redistribution actions
to perform if the criteria enforced by the
match
commands are met. The
no route-map
command deletes
the route map.
The
match
route-map configuration command has multiple formats. The
match
commands can be given
in any order and all
match
commands must pass to cause the route to be redistributed according to the
set actions
given with the
set
commands. The
no
forms of the
match
commands remove the specified
match criteria.
external
Specifies the external route (Border Gateway Protocol [BGP], Enhanced
Interior Gateway Routing Protocol [EIGRP], and Open Shortest Path First
[OSPF] type 1/2). You can specify more than one keyword.
internal
Specifies the internal route (including the OSPF intra/inter area). You can
specify more than one keyword.
local
Specifies the locally generated route. You can specify more than one
keyword.
nssa-external
Specifies the nssa-external route (OSPF type 1/2). You can specify more
than one keyword.
type-1
Specifies the OSPF external type 1 route. You can specify more than one
keyword.
type-2
Specifies the OSPF external type 2 route. You can specify more than one
keyword.
Release
Modification
5.0(3)A1(1)
This command was introduced.
