239
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
match ip route-source prefix-list
match ip route-source prefix-list
To redistribute IPv4 routes that have been advertised by routers and access servers at the address
specified by the access lists, use the
match ip route-source
prefix-list
command. To remove the
route-source entry, use the
no
form of this command.
match ip route-source prefix-list
prefix-list-name
[...
prefix-list-name
]
no match ip route-source prefix-list
prefix-list-name
[...
prefix-list-name
]
Syntax Description
Command Default
No filtering on route source.
Command Modes
Route-map configuration mode
Command History
Usage Guidelines
An ellipsis (...) in the command syntax indicates that your command input can include multiple values
for the
prefix-list-name
argument.
Use the
route-map
global configuration command, and the
match
and
set
route-map configuration
commands to define the conditions for redistributing routes from one routing protocol into another. Each
route-map
command has a list of
match
and
set
commands associated with it. The
match
commands
specify the match criteria—the conditions under which redistribution is allowed for the current
route-map
command. The
set
commands specify the set actions—the particular redistribution actions
to perform if the criteria enforced by the
match
commands are met. The
no route-map
command deletes
the route map.
The
match
route-map configuration command has multiple formats. The
match
commands can be given
in any order, and all
match
commands must pass to cause the route to be redistributed according to the
set actions
given with the
set
commands. The
no
forms of the
match
commands remove the specified
match criteria.
A route map can have several parts. Any route that does not match at least one
match
clause that relates
to a
route-map
command is ignored; that is, the route is not advertised for outbound route maps and is
not accepted for inbound route maps. If you want to modify only some data, you must configure second
route map section with an explicit match specified.
There are situations in which the next hop and source router address of the route are not the same.
This command requires the LAN Enterprise Services license.
prefix-list-name
Number or name of a prefix list. It can be any alphanumeric string up
to 63 characters. The ellipsis indicates that multiple values can be
entered, up to 32 prefix lists.
Release
Modification
5.0(3)A1(1)
This command was introduced.
