Purpose
Command or Action
Saves configuration changes.
Use one of the following commands:
Step 4
•
end
•
When you issue the
end
command, the system prompts you to commit
changes:
Uncommitted changes found, commit them before
•
commit
Example:
RP/0/RP0/CPU0:router(config-ntp)#
end
exiting(yes/no/cancel)?
[cancel]:
◦
Entering
yes
saves configuration changes to the running
configuration file, exits the configuration session, and returns
the router to EXEC mode.
or
RP/0/RP0/CPU0:router(config-ntp)#
commit
◦
Entering
no
exits the configuration session and returns the router
to EXEC mode without committing the configuration changes.
◦
Entering
cancel
leaves the router in the current configuration
session without exiting or committing the configuration changes.
•
Use the
commit
command to save the configuration changes to the
running configuration file and remain within the configuration session.
Verifying the Status of the External Reference Clock
This task explains how to verify the status of NTP components.
The commands can be entered in any order.
Note
SUMMARY STEPS
1.
show ntp associations
[
detail
] [
location node-id
]
2.
show ntp status
[
location node-id
]
DETAILED STEPS
Purpose
Command or Action
Displays the status of NTP associations.
show ntp associations
[
detail
] [
location node-id
]
Example:
RP/0/RP0/CPU0:router# show ntp associations
Step 1
System Management Configuration Guide for Cisco NCS 5000 Series Routers, IOS XR Release 6.2.x
162
Implementing NTP
Verifying the Status of the External Reference Clock
