Displaying the Service Instances with MAC Security Enabled on a Specific
Bridge Domain
Perform this task to display the service instances on a specific bridge domain that have MAC security enabled.
SUMMARY STEPS
1.
enable
2.
show bridge-domain id
mac security
3.
end
DETAILED STEPS
Purpose
Command or Action
Enables privileged EXEC mode.
enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Displays all the service instances with MAC security
enabled on a specific bridge domain.
show bridge-domain id
mac security
Example:
Device# show bridge-domain 100 mac security
Step 2
Returns to user EXEC mode.
end
Example:
Device# end
Step 3
Showing the MAC Addresses of All Secured Service Instances
SUMMARY STEPS
1.
enable
2.
show ethernet service instance mac security address
3.
show mac address-table secure
4.
end
Layer 2 Configuration Guide for Cisco NCS 4200 Series
60
Configuring MAC Address Security on Service Instances and EVC Port Channels
Displaying the Service Instances with MAC Security Enabled on a Specific Bridge Domain
