Power supplies (2) (AC power supply shown)
2
The following figure shows the hardware features seen from the port side of the chassis.
Figure 2: Hardware Features on the Port Side of the Chassis
36 40-Gigabit QSFP+ ports
5
Chassis LEDs
1
Screw holes (2) for attaching a front-mount bracket for four-post racks
(one bracket on each of two sides)
6
USB ports
2
Notch in both sides of the chassis for locking the power supply end of
the chassis to the bottom support brackets
7
Out-of-band management
port (RJ-45 port)
3
Console port (RJ232 port)
4
Ports
The switch chassis includes the following types of ports:
•
40-Gigabit QSFP+ interface ports (36)
•
Console port (1)
•
Out-of-band management port (1)
•
USB flash-memory ports (2)
The interface ports support QSFP+ transceivers and are numbered from left to right. You use these ports to
connect the switch to Cisco Nexus 9300 switches in the ACI network that this switch belongs to. These ports
are numbered 1 to 36 from left to right.
Cisco Nexus 9336PQ ACI-Mode Switch Hardware Installation Guide
2
Overview
Ports
